6.7 MACHINE BODY
Use a sponge or a damp cloth to clean the outside of the machine and if necessary, use soft brush to eliminate
stubborn dirt.
The machine’s impact resistant surface is rough to make it harder to see scratches produced during use. However,
this does not make it easy to remove stubborn stains from its surface.
CAUTION
Never use steam cleaners, hoses with running water or high-pressure washers.
6.8 MAINTENANCE SCHEDULE
NOTE:
For all the operations described here, refer to the detailed instructions and warnings given in the
relative sections.
The frequency with which the routine maintenance is carried out is determined by the number of complete machine
discharge cycles.
The machine has an autonomy of approximately 1 hour. Each cycle is considered to be 1 working hour.
Cycles
Description
1
Clean the squeegee (see section
Errore. L'origine riferimento non è stata trovata.
)
5
Clean the solenoid valve filter (see section
Errore. L'origine riferimento non è stata trovata.
).
Clean the vacuum filter (see section
Errore. L'origine riferimento non è stata trovata.
).
Clean the recovery tank seals
1
and
2
using a damp cloth.
10
Clean the bottom plate
3
and particularly the clean water nozzles
4
using a damp cloth or abrasive sponge.