5.10 FLOOR CLEANING INSTRUCTIONS
PREPARATION AND WARNINGS
Remove any loose solid residues from the surface to be treated (using suitable equipment such as vacuum cleaners,
sweepers, etc.) If this is not done, the solid dirt could prevent the squeegee from working properly and prevent the
floor from being dried correctly.
This machine must only be used by trained personnel.
CAUTION
Do not obstruct the motor cooling fan grille.
DIRECT WASHING OR FOR SLIGHTLY DIRTY SURFACES
Scrubbing and drying in a single pass.
Prepare the machine and use it as described in section
Errore. L'origine riferimento non è stata trovata.
.
NOTE:
Never use the machine without a detergent solution as it may damage the floor.
INDIRECT WASHING OR FOR VERY DIRTY SURFACES
Scrubbing and drying in multiple passes.
Prepare the machine and use it as described in section
Errore. L'origine riferimento non è stata trovata.
.
First step:
Wash the floor as described in section
Errore. L'origine riferimento non è stata trovata.
without drying it.
Give the detergent solution time to act on the dirt, as indicated in the instructions of the detergent used.
Second step:
Proceed as explained in the previous section and also dry the floor.
NOTE:
Never use the machine without a detergent solution as it may damage the floor.
POST-CLEANING OPERATIONS
1) Turn off the detergent dispensing function.
2) After having completely dried the surface of any traces of water, wait a few seconds, then raise the
squeegee and turn off the vacuum motor.
3) Go to a suitable place where to drain the tanks.
4) Empty and clean the tanks (see sections
Errore. L'origine riferimento non è stata trovata.
and
Errore. L'origine riferimento non è stata trovata.
).
5) Turn off the machine using the ON / OFF switch
6) Lock the handle using the locking lever.
7) Charge the battery, if necessary.
