1.3
INTRODUCTION
www.maxcessintl.com
DSE-45
MI 2-315 1 A
Operation principle
The DSE-45 Ultrasonic Sensor utilizes scanning technology to
detect on-web and off-web transition edges of web material
that is located within the sensor field of view. This allows new
edges to be detected at any time. The scanning orientation is
from the closed end of the sensor to the open end of the
sensor. The position of the detected edges in relation to either
the sensor default proportional band or the user configured
proportional band is then applied to the output signals of the
sensor. Both analog and digital output signals are provided.
The DSE-45 Ultrasonic Sensor can be used in conjunction with
the Fife Controllers/Processors as a guiding system. If the
sensor is connected to a D-MAX Operator Interface via an
Ethernet connection, multiple menus are available for
configuring the sensor. It can also be used as a "stand-alone"
for web width monitoring or edge position monitoring.
