6.5
DSE-45 WEB PAGE
www.maxcessintl.com
DSE-45
MI 2-315 1 A
Analog output configuration contains fields that apply to the analog
outputs. These fields can be edited:
1.
Enter the desired value in the proper field, and then
2.
Click the "Apply Changes" button.
The changes are effective immediately.
There are four configurable analog outputs, controlled by three
configurable signal sources. The analog channels can be
independently configured for each Job that is enabled. The analog
channels are as follows:
Analog Channel 1 (Connector X3, pin 8)
Analog Channel 2 (Connector X3, pin 5)
Analog Channel 3 (Connector X3, pin 2 & Connector X2, pin 4)
See
parameter descriptions; page 6.6.
