8.7
JOB SETTINGS
www.maxcessintl.com
DSE-45
MI 2-315 1 A
Control options
To view or modify any of the following, follow the Control
Options menu structure in Figure 13
Job enable
Use these menus to enable/disable the desired jobs.
Remote control
Use these menus to enable or disable control from remote
devices; you can set control as ON or OFF.
Length unit
Use these menus to set the units (mm or inch) that are
displayed and used in various menus.
Control options menu structure
Status #
1X.6
Control Options
1X.6.1
Job Enable
1X.6.1.1
(A) Job1
1X.6.1.2
(B) Job2
1X.6.1.3
(C) Job3
1X.6.1.4
(D) Job4
1X.6.1.5
(E) Job5
1X.6.1.6
(F) Job6
1X.6.1.7
(G) Job7
1X.6.1.8
(H) Job8
1X.6.2
Remote Control
1X.6.2.1
ON
1X.6.2.2
OFF
1X.6.3
Length Unit
1X.6.3.1
mm
1X.6.3.2
in
Use the Up and Down Arrow keys to highlight the desired
setting, then press the Enter key to save the setting.
select "Control Options", then press ENTER.
From the SE-45 Home Screen, press the ENTER key to enter the menus,
Use the Up and Down Arrow keys
to scroll to the desired Job. Use
the Left and Right Arrow keys to
highlight the desired Job (enable
the job), and then press the
ENTER key to store the change.
(The contents of this list may vary).
Use the Up and Down Arrow keys to highlight the desired
setting, then press the Enter key to save the setting.
Figure 13. Control options menu structure
