6.4
DSE-45 WEB PAGE
www.maxcessintl.com
DSE-45
MI 2-315 1 A
Network contains network settings that can be edited. To change any of
the settings located on this tab, enter the desired value in the proper
field and then click on the "Apply Changes" button.
The changes are sent to the sensor but are not yet effective. You must
cycle the power to the sensor for these changes to take effect.
The MaxNet ID is important only if the sensor is communicating with
another Fife network device incorporating the MaxNet protocol, such as
a D-MAX Controller or Operator Interface.
The MaxNet Cycle Time should remain the default, unless a change is
necessary to reduce network traffic.
