Falcon R-Class | User Guide
228
Web GUI: Monitor > LLDP > Neighbors
Figure 4-164: LLDP
–
Neighbor Information
Table 4-157: LLDP Neighbor Information Parameters
Local Interface
The interface on which the LLDP frame was received.
Chassis ID
The
Chassis ID
is the identification of the neighbor's LLDP frames.
Remote Port ID
The
Remote Port ID
is the identification of the neighbor port.
Port Description
Port description
is the port description advertised by the 228
neighbor unit.
System Name
System name
is the name advertised by the neighbor unit.
System Capabilities
Describes the 228 nei
ghbor unit’s capabilities. The possible
capabilities are:
•
Other
•
Repeater
•
Bridge
•
WLAN Access Point
•
Router
•
Telephone
•
DOCSIS cable device
•
Station only
•
Reserved
When a capability is “Enabled
”
–
the capability is followed by (+).
When a capability is “Disabled
”
–
the capability is followed by (-).
Management Address
The neighbor unit’s address used for higher layer entities to assist the
discovery by the network management. This could for instance hold
the neighbor’s IP address.
4.18.3.2
LLDP-MED Neighbour
This section provides a status overview of all LLDP-MED neighbours. The displayed table contains a
row for each port on which an LLDP neighbor is detected. This function applies to VoIP devices which
support LLDP-MED. The columns hold the following information:
Web GUI: Monitor > LLDP > LLDP-MED Neighbors
Figure 4-165: LLDP MED - Neighbour Information
Содержание Falcon-RX/812/G/A
Страница 1: ...Falcon R Class User Guide Falcon RX Software version 8 0 20 www fibrolan com...
Страница 11: ...Falcon R Class User Guide 11 2 System Description 2 1 Block Diagram Figure 2 1 R Class functional block diagram...
Страница 86: ...Falcon R Class User Guide 86 Web GUI Configuration QoS DSCP Translation Figure 4 58 DSCP Translation...
Страница 221: ...Falcon R Class User Guide 221 Web GUI Configuration LLDP LLDP MED Figure 4 162 LLDP MED Configuration displays...
