Falcon R-Class | User Guide
206
Web GUI: Configuration > IPMC > MLD Snooping > VLAN Configuration
Figure 4-148: MLD Snooping VLAN Configurations
Table 4-142: MLD Snooping VLAN Configuration Parameters
VLAN ID
The VLAN ID of the entry.
MLD Snooping
Enabled
Enable the per-VLAN MLD Snooping. Up to
511
VLANs can be selected for MLD
Snooping.
Querier Election
Enable the MLD
Querier election
in the VLAN. Disable to act as a MLD Non-
Querier.
Compatibility
Compatibility is maintained by hosts and routers taking appropriate actions
depending on the versions of MLD operating on hosts and routers within a
network. The allowed selection is:
MLD-Auto
,
Forced MLD v1, Forced MLD
v2.
Default compatibility value is
MLD-Auto
.
PRI
Priority of Interface.
It indicates the MLD control frame priority level
generated by the system. These values can be used to prioritize different
classes of traffic. The allowed range is
0
(best effort) to
7
(highest), default
interface priority value is
0
.
RV
Robustness Variable
. The Robustness Variable allows tuning for the expected
packet loss on a LINK. The allowed range is
1
to
255
, default robustness
variable value is 2.
QI
Query Interval
. The Query Interval is the interval between General Queries
sent by the Querier. The allowed range is
1
to
31744
seconds, default query
interval is 125 seconds.
QRI
Query Response Interval
. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries. The
allowed range is
0
to
31744
in tenths of seconds, default query response
interval is 100 in tenths of seconds (10 seconds).
LLQI
Last Listener Query Interval
. The Last Listener Query Interval is the Maximum
Response Delay used to calculate the Maximum Response Code inserted into
Multicast Address Specific Queries sent in response to Version 1 Multicast
Listener Done messages. It is also the Maximum Response Delay used to
calculate the Maximum Response Code inserted into Multicast Address and
Source Specific Query messages. The allowed range is
0
to
31744
in tenths of
seconds, default last listener query interval is 10 in tenths of seconds (1
second).
URI
Unsolicited Report Interval.
The Unsolicited Report Interval is the time
between repetitions of a node's initial report of interest in a multicast
address. The allowed range is
0
to
31744
seconds, default unsolicited report
interval is 1 second.
Содержание Falcon-RX/812/G/A
Страница 1: ...Falcon R Class User Guide Falcon RX Software version 8 0 20 www fibrolan com...
Страница 11: ...Falcon R Class User Guide 11 2 System Description 2 1 Block Diagram Figure 2 1 R Class functional block diagram...
Страница 86: ...Falcon R Class User Guide 86 Web GUI Configuration QoS DSCP Translation Figure 4 58 DSCP Translation...
Страница 221: ...Falcon R Class User Guide 221 Web GUI Configuration LLDP LLDP MED Figure 4 162 LLDP MED Configuration displays...
