Falcon R-Class | User Guide
194
Role
The current STP port role. The port role can be one of the following values:
Alternate Port
BackupPortRootPort
Designated Port
State
The current STP port state. The port state can be one of the following values:
Discarding
Learning
Forwarding
Path Cost
The current STP port path cost. This will either be a value computed from the
Auto
setting, or any explicitly configured value
Edge
The current STP port (operational) Edge Flag. An Edge Port is a switch port to
which no Bridges are attached. The flag may be automatically computed or
explicitly configured. Each Edge Port transits directly to the Forwarding Port
State, since there is no possibility of it participating in a loop.
Point-to-Point
The current STP port point-to-point flag. A point-to-point port connects to a
non-shared LAN media. The flag may be automatically computed or explicitly
configured. The point-to-point properties of a port affect how fast it can transit
to STP state.
Uptime
The time since the bridge port was last initialized.
4.15.7.3
STP Port Status
This section displays the STP CIST port status for physical ports switch.
Web GUI: Monitor > Spanning Tree > Port Status
Figure 4-139: STP Port Status
Содержание Falcon-RX/812/G/A
Страница 1: ...Falcon R Class User Guide Falcon RX Software version 8 0 20 www fibrolan com...
Страница 11: ...Falcon R Class User Guide 11 2 System Description 2 1 Block Diagram Figure 2 1 R Class functional block diagram...
Страница 86: ...Falcon R Class User Guide 86 Web GUI Configuration QoS DSCP Translation Figure 4 58 DSCP Translation...
Страница 221: ...Falcon R Class User Guide 221 Web GUI Configuration LLDP LLDP MED Figure 4 162 LLDP MED Configuration displays...
