FibroLAN Falcon-RX/812/G/A Скачать руководство пользователя страница 305

Страница: 305 / 333

Falcon R-Class | User Guide

305

Figure 7-7: Upload Configuration

It is possible to upload a file from the web browser to all the files on the switch, except

default-config

which is read-only. Select the file to upload, select the destination file on the target, then click

Upload

Configuration

. If the destination is

running config

, the file will be applied to the switch configuration.

This can be done in two ways:

•

Replace mode

: The current configuration is fully replaced with the configuration in the uploaded

file.

•

Merge mode:

The uploaded file is merged into

running-config

If the flash file system is full (i.e., contains

default-config

and 32 other files, usually including

startup-

config

), it is not possible to create new files. Instead, an existing file must be overwritten or another

file must be deleted.

Activate

It is possible to activate any of the configuration files present on the switch, except for

running-config

which represents the currently active configuration.

Select the file to activate and click

Activate Configuration

. This will initiate the process of completely

replacing the existing configuration with that of the selected file.

Web GUI: Maintenance > Configuration > Activate

Figure 7-8: Activate Configuration

Delete

It is possible to delete any of the writable files stored in flash, including

startup-config

. If this is done

and the switch is rebooted without a prior Save operation, this effectively resets the switch to default
configuration.

Содержание Falcon-RX/812/G/A














































































































































































































































































































































Результаты поиска

Содержание Falcon-RX/812/G/A

Отзывы:

FibroLAN Falcon-RX/812/G/A, Руководство пользователя, Страница: 305 / 333

Результаты поиска

Содержание Falcon-RX/812/G/A

Отзывы: