FibroLAN Falcon-RX/812/G/A, Руководство пользователя

Страница: 57 / 333

Falcon R-Class | User Guide
57
A port must be a member of both a VLAN and a Private VLAN to be able to forward packets. By
default,
all ports are VLAN unaware and members of VLAN 1 and Private VLAN 1 . A VLAN unaware
port can only be a member of one VLAN, but it can be a member of multiple Private VLANs.
Web GUI: Configuration > Private VLANs > Membership
Figure 4-32: Private VLAN Membership Configuration display
Table 4-29: Private VLAN Membership Configuration Parameters
Delete To delete a private VLAN entry, check this box. The entry will be
deleted during the next Save.
Private VLAN ID Indicates the ID of this private VLAN.
Port Members A row of check boxes for each port is displayed for each private VLAN
ID.
To include a port in a private VLAN, check the box.
To remove or exclude the port from the private VLAN, make sure the
box is unchecked.
By default, no ports are members, and all boxes are unchecked.
Add a New Private VLAN Click to add a new private VLAN ID. An empty row is added to the
table, and the private VLAN can be configured as needed. The allowed
range for a private VLAN ID is the same as the switch port number
range. Any values outside this range are not accepted, and a warning
message appears. Click "OK" to discard the incorrect entry or click
"Cancel" to return to the editing and make a correction. The Private
VLAN is enabled when you click "
Save ". The “Delete” button can be
used to undo the addition of new Private VLANs.
4.6.5.2 Port Isolation Configuration
This section is used for enabling or disabling port isolation for ports in a Private VLAN.
A port member of a VLAN can be isolated to other isolated ports on the same VLAN and Private VLAN.
Web GUI: Configuration > Private VLANs > Port Isolation