FibroLAN Falcon-RX/812/G/A, Руководство пользователя, Страница: 142 / 333

Falcon R-Class | User Guide
142
Global Configuration
Timeout Timeout is the number of seconds, in the range
1
to
1000
, to wait for a
reply from a RADIUS server before retransmitting the request.
Retransmit Retransmit is the number of times, in the range
1
to
1000
, a RADIUS
request is retransmitted to a server that is not responding. If the server
has not responded after the last retransmit it is dead.
Deadtime Deadtime, which can be set to a number between
0
to
1440
minutes, is
the period during which the switch will not send new requests to a server
that has failed to respond to a previous request. This will stop the switch
from continually trying to contact a server that it has already determined
as dead. Setting the Deadtime to a value greater than 0 (zero) will enable
this feature, but only if more than one server has been configured
Change Secret Key Specify to change the secret key or not. When "Yes" is selected for the
option, you can change the secret key - up to 63 characters long - shared
between the RADIUS server and the switch.
NAS IP Address
(Attribute 4) The IPv4 address to be used as attribute 4 in RADIUS Access-Request
packets. If this field is left blank, the IP address of the outgoing interface
is used.
NAS IPv6 Address
(Attribute 95)
The IPv6 address to be used as attribute 95 in RADIUS Access-Request
packets. If this field is left blank, the IP address of the outgoing interface
is used.
NAS Identifier
(Attribute32) The identifier - up to 253 characters long - to be used as attribute 32 in
RADIUS Access-Request packets. If this field is left blank, the IP address
of the outgoing interface is used.
Server Configuration
The table has one row for each RADIUS Server and several columns listed below.
Delete
To delete a RADIUS server entry, check this box. The entry will be deleted
during the next Save.
Hostname The IP address or
hostname
of the RADIUS server.
Auth Port
The UDP port to use on the RADIUS server for authentication. Set to 0 to
disable authentication.
Acct Port
The UDP port to use on the RADIUS server for accounting. Set to 0 to
disable accounting.
Timeout
This optional setting overrides the global timeout value.
Leaving it blank will use the global timeout value.
Retransmit
This optional setting overrides the global retransmit value. Leaving it
blank will use the global retransmit value.
Change Secret Key
Specify to change the secret key or not. When the checkbox is checked,
you can change the setting overrides the global key. Leaving it blank will
use the global key.