Festo CPX-FB23, Электронное руководство

Страница: 115 / 122

A. Technical appendix
A−11
Festo P.BE−CPX−FB23−EN en 0308NH
Module parameters of analogue input
modules type CPX−2AE−U−I Function no. Default setting
Monitoring the CPX module
Short circuit/overload in sensor supply (SCS)
Monitoring parametrizing faults
4828 + m * 64
1)
Active
Active
Reaction after short circuit/overload
Short circuit/overload in sensor supply (SCS)
4828 + m * 64 +1
1)
Switch on
Vsen again?
Data format of analogue inputs
4828 + m * 64 + 3
1)
VZ + 12 bit
right−justified
(type 03−compatible)
Monitoring channel x
1)
Channel−by−channel enable channel 0:
channel 1:
Monitoring value below rated range
(lower limit value)
Monitoring value above rated range
(upper limit value)
Monitoring wire fracture
Monitoring parametrizing faults
4828 + m * 64 + 6
1)
4828 + m * 64 + 7
1)
Inactive
Inactive
Inactive
Active
Signal range channel x
1)
Channel−by−channel setting of the signal range
4828 + m * 64 + 8
1)
Use the setting of the
DIL switches
Measured value smoothing channel x
1)
Channel−by−channel setting of the measured
value smoothing
4828 + m * 64 + 9
1)
No measured value
smoothing
Lower limit value channel x
1)
Channel−by−channel setting channel 0:
channel 1: 4828 + m * 64 + 10/11
1)
4828 + m * 64 + 12/13
1)
0
0
Upper limit value channel x
1)
Channel−by−channel setting channel 0:
channel 1: 4828 + m * 64 + 14/15
1)
4828 + m * 64 + 16/17
1)
4095
4095
Force channel x
1)
Force mode inputs channel x
Force state inputs channel x
2)
Disabled
Reset signal
1)
m = module number (0...10),
x = channel number (0, 1)
2)
Access is made protocol−specific (see manual for handheld)
Tab.A/12: Parameters of the analogue input modules