Festo CPX-FB23, Электронное руководство

Страница: 84 / 122

2. Commissioning
2−40
Festo P.BE−CPX−FB23−EN en 0308NH
2.3.2 RUN/PAUSE and STOP of the master
In the STOP operating status of the CC−Link master, the status
of the outputs depends on whether these are in the bit range
(RY) or in the word range (RWw).
The following table shows the reaction according to CC−Link
specifications:
Outputs CPU status
RUN/PAUSE STOP
RY output Refresh Clear: In the STOP status the
outputs are reset.
RWw output Refresh Hold: In the STOP status the
outputs retain their status.
Tab.2/18: RUN/PAUSE and STOP of the master
Please note
With STOP the enable bits of the analogue outputs
(control) are set to 0.
The analogue outputs will then also be set.