Festo CPX-FB23, Электронное руководство

Страница: 50 / 122

2. Commissioning
2−6
Festo P.BE−CPX−FB23−EN en 0308NH
Pneumatic modules
1)
Type Module
id
tifi
2)
Assigned addresses
identifiers
2)
RX RY RWr RWw
Pneumatic interface for MPA
valves (type 32) VMPA−FB−EPL−...
MPA pneumatic module (type
32) without electrical isolation VMPA1−FB−EMS−8
3)
MPA1S 1 byte
MPA pneumatic module (type
32) with electrical isolation VMPA1−FB−EMG−8
3)
MPA1G 1 byte
Pneumatic interface for CPA
valves (type 12) with DIL
switch setting:
4)
1...8 valve coils
1...16 valve coils
1...24 valve coils
(22 usable)
CPX−GP−CPA−10
CPX−GP−CPA−14 CPA10/14
1 byte
2 bytes
3 bytes
Pneumatic interface for Midi/
Maxi valves (type 03) with DIL
switch setting:
4)
1...8 valve coils
1...16 valve coils
1...24 valve coils
1...32 valve coils
(26 usable)
CPX−GP−03−4.0 TYP3
1 byte
2 bytes
3 bytes
4 bytes
1)
Further modules in preparation, see also Tab.2/3.
2)
Module identifiers on the handheld.
3)
Type of electronic module used.
4)
The number of output addresses occupied by the pneumatic modules (midi/maxi or CPA
pneumatics) is set on the pneumatic interface with a DIP switch (see manual CPX I/O modules).
Tab.2/2: Overview of identifiers and addresses of pneumatic modules