FDP EX-CPL, Руководство по установке

Страница: 49 / 91

Page 49 of 91
Rev. 4.20
Output setting
•OUTPUT ADDRESS: 004
TYPE:CONTR.PANEL OUT
DEVICE: RELAY
OUT OF SERVICE: NO
STATUS: DISABLED
TEST RUN: NO
ACTIVATION: NO
SILENT MODE: NO
ACTIV. DELAY s: -
MAN.ALARM ACTIV:
NO
OUT ACTI.TIME s: -
INVERT: NO
Esc. Pre. Next Mod.
Output setting
•OUTPUT ADDRESS: 003
TYPE: FAULT
DEVICE: SUPERV.RELAY
CONFIG.: 13, 56, 24
OUT OF SERVICE: NO
FAULT: NO
STATUS: DISABLED
TEST RUN:
NO
SILENT MODE: NO
ACTIV. DELAY s: -
OUT ACTI.TIME s: -
INVERT: NO
Esc. Pre. Next Mod.
Output setting
•OUTPUT ADDRESS: 004
TYPE:CONTR.PANEL OUT
DEVICE: OPEN COLL.
OUT OF SERVICE: NO
STATUS: DISABLED
TEST RUN: NO
ACTIVATION: NO
SILENT MODE: NO
ACTIV. DELAY s: -
MAN.ALARM ACTIV:
NO
OUT ACTI.TIME s: -
INVERT: NO
Esc. Pre. Next Mod.
9.2.4 Fault output
It is a output normally in condition of supervisory type siren. It is activated
every time that the control panel finds a fault.
The output is normally of supervisory type, but it is possible to change the
set up mode through the software (“
CONFIG.
”) and the hardware through
the bridge “
SEL1
” (see the picture in the chapter 9.2.1).
CONFIG.
: set up the output type (mod.):
1) “
13, 56, 24 (24V R.A.)
”: supervisory output;
2) "
13, 46 (24V N.P.)
": 24Vdc output to be missing;
3) "
35 (N.O.)
": NO relay output;
4) "
34 (N.C.)
": NC relay output.
After the user has modified the “
CONFIG
.” value, it is necessary to change
the bridges of “
SEL1
”:
6
4
2
5
3
1
6
4
2
5
3
1
6
4
2
5
3
1
6
4
2
5
3
1
1 2 3 4
For the information about the menu items, to see the chapter 9.1.4.
9.2.5 Relay outputs
There are two set up relays not supervised NC and NO through the bridges
of “
SEL3
” and “
SEL4
” (see the picture in the chapter 9.2.1).
3
2
1
RELAY
SEL4
= NO
3
2
1
= NC
3
2
1
= NO
3
2
1
= NC
RELAY
SEL3
For the information about the menu items, to see the chapter 9.1.4.
9.2.6 Open collector outputs
The control panel has four set up open collector outputs. Normally, the
outputs are not activated.
For the information about the menu items, to see the chapter
9.1.4.