Page 37 of 91
Rev. 4.20
The point acquisition from the control panel is pointed out with a beep and
with the message “
COMPLETED OPERATION
” on the display. In case of
address assignment like single point, the confirmation with “
Ok
” provides to
return to the “
Main menu
”.
In case of address assignment like self-increment, the passage to the
research of the next point is automatic. Typing in “
Canc
”, the acquisition of
further points ends. If the detector presents faults or out of range values, the
control panel installs it and places it out of service.
7.2 POINT INFORMATION
Besides begin able to view the information relative to each addressed point (detector, input/output module,
isolator, button), it is also possible to modify some parameters as an example the zone of belonging or the
element name.
7.2.1 Main menu
After the user has entered the “
Main menu
”, select “
POINT
” and confirm
with the key “
Sel.
” to pass to “
Point menu
”.
7.2.2 Point menu
After the user has entered the “
Point menu
” select the item “
view/mod.
”.
Select “
Back
” to return to the “
Main menu
”. Select “
Esc.
” to return to the
“
Main menu
” and to go out completely.
7.2.3 Loop selection
Select the “
Loop
” to programme and confirm with “
Sel.
”, use the four
arrows to set oneself on the line that shows the loop the user wants to
programme and select and confirm with “
Sel.
”. Type in “
Canc
” to return to
the “
Point menu
”.
Main menu
POINT
SETTING
ZONE CONNECTION
LOOP ACC. LEVEL
OUTPUT DIAGNOSTIC
EVENT 3b option
ACCESS LEVEL: 1
Sel. Esc.
Point menu
view/mod.
insert
remove
d.b.reset
ACCESS LEVEL: 1
Sel. Back Esc.
Loop selection
•LOOP 1
LOOP 2
LOOP 3
LOOP 4
Sel. Canc
Information
COMPLETED OPERATION
Ok
.
Содержание EX-CPL
Страница 5: ...Page 5 of 91 Rev 4 20 ...
Страница 64: ...Page 64 of 91 Rev 4 20 MOXA DE 211 module ...