Extron electronics SMD 101 Скачать руководство пользователя страница 92

Страница: 92 / 162

Reset Device

Provides several options to reset the SMD 101 if hardware or software conditions require.
See the

SMD 101 Reset Summary

on page 136 for a comparison of the reset modes.

NOTE:

Proceed with caution. Some reset modes intentionally delete all user files,

media content, and settings from internal memory.

Figure 79.

Device Reset, Reset Options

To reset the device:

Click the

Advanced

Configuration>Reset

Device

icon on the navigation bar (see

figure 63

on page 66).

The

Reset

Device

page opens (see figure 79).

Click the radio button for the desired reset option.

Reset Device settings to default, but retain user files and all IP settings

—

Resets all hardware and software to default condition, but retains user files and IP
settings for communication.

Reset Device settings and delete internal user files (Retains all IP
settings)

— Resets all hardware and software to default condition, deletes user

files stored in internal memory, and retains communication settings including the IP
address, subnet mask, gateway IP address, device name, DHCP setting, and port
mapping. This reset is recommended after updating device firmware.

Reset Device settings, delete internal user files, and reset all IP settings

—

Resets all hardware and software to default condition including the communications
settings.

NOTE:

If the control PC is connected via the Ethernet port, communications

is broken. Use the default IP address (

192.168.254.254

), subnet mask

(

255.255.0.0

), and default gateway (

0.0.0.0

), the front panel config port, or the

rear panel RS-232 port to reconnect.

Click

Apply

(

). The reset process begins.

Depending on the reset option chosen, either refresh the browser page to reconnect to
the SMD 101 or enter the default IP address into the browser.

Reboot Now

If conditions exist that cause to the device to stop responding to other software commands
or to front panel button presses, click

Reboot

Now

(

) to force a reboot. The reboot

process is unrelated to the reset options and no changes are made to settings or files on
the unit.

SMD 101 • Web-based User Interface

Содержание SMD 101



































































































































































Результаты поиска

Содержание SMD 101

Отзывы:

Бренды по названию

Популярные бренды

Extron electronics SMD 101, Руководство пользователя

Результаты поиска

Содержание SMD 101

Отзывы:

Бренды по названию

Популярные бренды