Extron electronics SMD 101, Руководство пользователя

Страница: 36 / 162

Browser
By default, the player page opens with the Streams tab selected (see figure 28, left).
Collapse the panel to create additional room for the lists or playlist editor panels. Tabs divide
available source content into
Streams (
1
) and Files (
2
), each with its own set of filtering
controls.
Figure 28. Browser Panel, Streams (
1
) and Files (
2
)
Browser Panel - Streams
The Streams tab in the
Browser
displays a list of streams identified on the local subnet the
SMD 101 is connected to.
NOTE: The compatibility of streams listed in the browser is not assured. Although a
stream is identified in the browser, stream compatibility is verified by the SMD 101
only as it is loaded for play.
The streams list is generated using information from Session Announcement Protocol (SAP)
messages broadcast on the local subnet.
•
Extron sources such as SME 100 and SMP 351 units are listed within an Extron folder.
• Third party devices are listed within the
Other
folder.
• Streams are grouped in folders within the list according to "x-plgroup:" attribute
information within each SAP message. Typically each stream source is listed according
to its IP address.
• The stream list is updated dynamically as devices are added to or removed from the
network or as streams switch transport protocol types, or you can refresh the list on
demand by clicking
.
TIP: It is possible that some listed streams are not accessible. For example, unicast
streams intended for another decoder or multicast streams in situations where
multicast traffic is being blocked by the network.
SMD 101 • Web-based User Interface 29