Extron electronics SMD 101, Руководство пользователя

Страница: 88 / 162

Date and Time
The Date and Time page (see figure 77) allows automatic sync of the date and time from
the connected control device, and provides manual setting of the date and time, timezone,
and daylight saving mode.
Figure 77. Date and Time Panel
Click Sync Date and Time to PC (
1
) to sync the date and time of the SMD 101 to the
connected PC.
NOTE: If you click the Sync Date and Time to PC button, the date and time
synchronization occurs immediately. The operation cannot be canceled. You do
not need to click
Save (
8
) for this option.
Set the date and time on the device manually from the Date and Time page:
1. Press the Calendar icon (
2
) on the right side of this field to manually select the current
date from the calendar dialog box.
2. Set the Time using the scroll list buttons (
3
), or enter the time directly into the fields.
3. Select the appropriate time zone from the Time Zone drop-down menu (
4
).
4. Click Save (
8
) to save the new date and time settings, or click Cancel (
9
) to discard
them.
You can automatically sync the unit with an external server-based source using Network
Time Protocol (NTP). When enabled,
NTP Time Sync overrides manual date and time
settings when sync occurs.
1. Click the NTP Time Sync check box (
5
).
2. Enter up to three NTP server addresses in the NTP Server # fields (
7
).
3. Click Sync Now! (
6
).
SMD 101 • Web-based User Interface 81