Extron electronics SMD 101, Руководство пользователя

Страница: 67 / 162

Automation
The Automation page (see figure 59) provides features and configuration options that are
normally set once and continue automatically. The controls within the Automation page let
you select and configure one or two types of screen saver (
1
,
2
), select a source stream
or file for the SMD to play as soon as it powers on (
3
), and define how the SMD 101
responds when a data stream is interrupted or lost (
4
). Once they are set up, these
features run automatically.
All users can view these settings, but only administrators can change them.
Figure 59. Configuration Page - Automation
Screen Saver panel
The screen saver activates when there is inactivity. Settings include:
1
(Show Screen Saver) After: — The length of inactivity time (no stream decode, no
commands received, and no user input) before the screen saver starts. Click After to
enable the screen saver mode, then enter or select the number of seconds (0 to 500) of
inactivity before the screen saver activates.
NOTE: Setting Show Screen Saver: value to 0 specifies the screen saver starts
immediately when no active input is detected.
Color: — The color of the screen saver. There are three choices:
• Black presents a black screen.
• Blue with OSD bug displays a blue background with the message:
SMD101: No Source Input
.
•
Custom allows selection of a color using the drop-down pallet or by entering the hex
code for the color in the format #RRGGBB.
2
Mute Video and Sync — When the screen saver is active, sync is still sent to the
connected display. For the display to enter its own power save mode (if equipped), sync
must also stop. Check
After and enter the number of seconds of inactivity before sync
is discontinued, up to 500.
figure 59
SMD 101 • Web-based User Interface 60