The
Progress
Bar
panel (see figure 57) controls the timing and position of the on-screen
status bar that includes stream, network condition, and device information.
Figure 57.
Progress Bar Configuration
1
Enable Progress Bar
— Check this box to enable or disable the progress bar.
NOTE:
The progress bar displays when the clip starts and when playback resumes
after pausing the clip.
2
Duration
— Use the adjustment arrows or enter the time directly in the duration field to
set the time (in seconds) the progress bar is displayed. Default is 5 seconds, maximum
is 500 seconds. 501 indicates the progress bar is always on. The IR remote can toggle
it on or off.
3
Position
— Using the drop-down list, select the screen position of the OSD from one
of nine positions:
•
left-top (default)
•
center-top
•
right-top
•
left-center
•
center-center
•
right-center
•
left-bottom
•
center-bottom
•
right-bottom
4
Hide URL:
— Check this box to hide the URL where the media files originates
5
Save
— When all changes are complete, click
Save
to keep the new configuration.
Configuring the On-Screen Displays
Figure 58.
On-Screen Display Configuration (left), Position Drop-down List (right)
To enable and set up the on-screen displays:
1.
Click
Configuration>On
Screen
Display
. The
On Screen Display
page opens
(see figure 58).
SMD 101 • Web-based User Interface
58
Содержание SMD 101
Страница 2: ......
