manualshive.com logo in svg

Extron electronics SMD 101, Руководство пользователя

Поделиться
Скачать
Extron electronics SMD 101 Скачать руководство пользователя страница 115

HTTP Connection to an SME 100

To connect SME 100 unicast or multicast push streams over HTTP, use the following 
templates.
For unicast streams with no password, the URI format is:  

http://<sme100_ip>/Web/output1.sdp

.

For multicast RTP over UDP RTSP (pull) streams with no credentials set, the URI format is:  

http://<sme100_ip>/Web/multicast.sdp

. 

NOTES:

 

• 

A typical IPv4 address for an SME 100 device on a private network is  
192.168.nnn.nnn or 10.nnn.nnn.nnn).

• 

A multicast address for a private network will typically be in the range 239.0.0.1 
to 239.255.255.254 with some exceptions, the range may be subdivided by 
larger organizations to match the geographical layout of sites.

If the encoder has an active admin password, it challenges the connection. An admin or 
user password is required for connection. To play the stream, the user name and password 
must be embedded in the URI entered in the 

Source

 field. 

For unicast or multicast PUSH streams with a password, the URI format is:  

http://user:password

@

<sme100_ip_adr>/Web/output1.sdp

.  

For multicast RTP over UDP RTSP (pull) streams with a password, the URI format is:  

http://user:password

@

<sme100_ip_adr>/Web/output1/multicast.sdp

.

In the following example, connect to a unicast RTSP over UDP stream broadcast from the 
SME 100 in 

figure 98 

on page 106, with the admin user account and password “

123456

”.

1. 

Locate the HTTP stream in the streams browser (see 

Player Page Overview 

on 

page 22).

2. 

Drag and drop the stream into the player panel. An error message indicates the stream 
load failed. The URI of the stream is shown in the 

Source:

 field.

3. 

Click the ellipsis (

...

) to open the full file path.

http://admin:[email protected]/web/extron.sdp

http:192.168.254.254/web/extron.sdp

Figure 99. 

Source Path Dialog

4. 

Add the SME 100 user name and password.

http://admin:[email protected]/web/extron.sdp

http:192.168.254.254/web/extron.sdp

Figure 100. 

Source Path Dialog, Add User Name and Password

5. 

Press <

Enter

> to load the stream.

The stream loads. If 

Load

 

Play

 is active, the stream begins playing. If Load Play is not 

active, press play (see 

Player Controls Features 

on page 23) to play the stream.

 

SMD 101 • Advanced Player Configuration

108

Содержание SMD 101



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды