1 Locate the grounding pad on the back of the chassis (see
the following figure
and
Figure 54: Back of
BlackDiamond 8810 Chassis
on page 75).
Figure 53: Back of BlackDiamond 8806 Chassis
Figure 54: Back of BlackDiamond 8810 Chassis
2 Strip 0.5-inch (1.2-cm) of insulation from the stranded copper wire cable.
3 Insert the stripped wire into the cable lug.
Caution
Be sure that no copper is visible between the lug and the cable insulation.
4 Crimp the lug securely onto the cable.
5 Insert the screws through the lug and into the grounding pad on the back of the chassis.
Installing the BlackDiamond 8800 Series Chassis
BlackDiamond 8800 Hardware Install Guide
75
