Table 9: BlackDiamond 8900-40G6X-xm Module Oversubscription (continued)
MSM Configuration
8806 Chassis
8810 Chassis
Single 8800-MSM48c module
10:1
10:1
Dual 8800-MSM48c modules
5:1
5:1
Single 8800-MSM96 module
5:1
15:2
Dual 8800-MSM96 modules
5:2
15:4
In general, the 8900-40G6X-xm module provides the following per-slot bandwidth:
Table 10: BlackDiamond 8900-40G6X-xm Per-Slot Bandwidth
MSM Configuration
8806 Chassis
8810 Chassis
Redundant 8900-MSM128 modules
160 Gbps per slot
80 Gbps per slot
Redundant 8800-MSM96 modules
96 Gbps per slot
64 Gbps per slot
Redundant 8800-MSM48c modules
48 Gbps per slot
48 Gbps per slot
In the default configuration of the 8900-40G6X-xm I/O module, all ports:
•
Are added to the default VLAN as untagged
•
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 8900-40G6X-xm I/O module has the following LEDs:
•
Module status
•
Module diagnostics
•
Port status (four below each QSFP+ cage)
When a port is operating in 40-Gbps mode, the farthest left LED below that port lights blue to indicate
the 40-Gbps operation. When a port is operating in 10-Gbps mode, each LED for an active channel from
the port lights green.
For more information about the LEDs and their activity on the 8900-40G6X-xm I/O module, see
I/O
Module LEDs
on page 35.
I/O Module LEDs
This section describes the LEDs for the module, the port, and inline power delivery status for I/O
modules in the BlackDiamond 8800 Series of switches.
Note
Inline power delivery applies only to a G48tc, G48Te2, 8500-G48T-e, or 8900-G48T-xl I/O
module with an installed S-POE card.
Module Status LEDs
The following table
describes the LED activity for all I/O modules that are installed in BlackDiamond
8800 Series switches.
BlackDiamond 8000 Series Modules
BlackDiamond 8800 Hardware Install Guide
35
