•
Module status
•
Module diagnostics
•
Port status
For information about the LEDs and their activity on the G24Xc I/O module, see
I/O Module LEDs
on
page 35.
G48Tc I/O Module
The G48Tc I/O module (
see the following figure
) has 48 autosensing 10/100/1000BASE-T ports that use
standard RJ-45 connectors.
Figure 15: G48Tc I/O Module
You can add an optional S-POE daughter card to the G48Tc I/O module to provide Power over Ethernet
functions in this module. With an installed S-POE card, the ports can deliver Power over Ethernet (PoE)
to an attached device, as well as the usual Ethernet connection, using a single cable. The G48Tc I/O
module supports the IEEE 802.3af PoE specification.
In the default configuration of the G48Tc I/O module, all ports:
•
Are added to the default VLAN as untagged
•
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
•
Operate in autonegotiation mode
The G48Tc I/O module has the following LEDs:
•
Module status
•
Module diagnostics
•
Port status
•
POE present
For information about the LEDs and their activity on the G48Tc I/O module, see
I/O Module LEDs
on
page 35.
G48Xc I/O Module
The G48Xc I/O module (
see the following figure
) has 48 unpopulated SFP-based 1-gigabit Ethernet
ports.
BlackDiamond 8000 Series Modules
BlackDiamond 8800 Hardware Install Guide
26
