Exabyte EZ17A, Инструкция по установке и эксплуатации, Страница: 86 / 168

Chapter 4
70 Exabyte EZ17M and EZ17A
Using the Command M enu
To perform hardware exercises and inventory checks:
1.
From the Main Menu, select Command Menu. The following
screen appears:
2.
If you want to move a cartridge, press [ENTER] . If you want to
perform other exercises, press 3 or 4 until you see the
exercise you want to perform and then press [ENTER] .
The following table describes each exercise and provides
additional instructions for performing the tests (if applicable).
4
M o v e
C a r t
Test Description Additional instructions
Move Cart
(Move
Cartridge) Moves a cartridge from one
location to another.
Important: Do not load a
cartridge in the drive. The drive
will not automatically eject the
cartridge.
When you select Move Cart, the
Move Src? screen appears.
Press
3
or
4
to select the
source index (the slot you w ant
the robot to pick from), then
press
[ENTER]
.
The Move Dest?screen appears.
Press
1
or
2
to select the
destination index (the slot w here
you want the robot to place the
cartridge), then press
[ENTER]
.
Init Element
(Initialize
Element Status) Performs an inventory of the
cartridges.