Exabyte EZ17A, Инструкция по установке и эксплуатации, Страница: 108 / 168

Chapter 6
92 Exabyte EZ17M and EZ17A
3. To change the autoloader’s baud rate, press
[ENTER]
. The
following screen appears:
4. Press
[ENTER]
. The following message flashes on the screen:
Select serial port baud rate for Auto Loader
Then, the following screen appears:
5. Press
3
or
4
until you see the baud rate that matches the
baud rate set on the host, and then press
[ENTER]
.
Accessing Console using HyperTerminal
Note:
These instructions assume you are using HyperTerminal,
a communications package available with Microsoft
Windows. If desired, you can use a different terminal
emulation software package.
To access Console using HyperTerminal:
1.
From your computer, launch HyperTerminal.
2.
In HyperTerminal’s Connection Description screen, enter a
name and choose an icon for this communications session.
3.
In HyperTerminal’s Connect To screen, choose the
communications port you are using from the Connect Using
field. Click OK.
4
B a u d R a t
n n n n n
B a u d ?
1 1 5 2 0 0
↕