Exabyte EZ17A, Инструкция по установке и эксплуатации, Страница: 75 / 168

Autoloader Operation
Installation and Operation 59
Avoiding interruptions
Although the autoloader has effective methods for resuming
operation, it is best to avoid interruptions when the autoloader is
operating in Sequential mode. In particular:
§
Do not reset or power cycle the autoloader unless absolutely
necessary
. Reset the autoloader only to clear certain
autoloader error conditions and power off the autoloader only
to perform maintenance or to store it. Avoid resetting or
power cycling the autoloader when a cartridge is in the drive
or the robot.
§
Do not remove the magazine unless absolutely necessary .
During operation, remove the magazine only after the
autoloader has processed all the cartridges. Never force the
magazine. The autoloader will not release the magazine until
it has completed a cartridge move or load already in progress.
Certain applications may also prevent the magazine from
being removed.
§
Do not remove a cartridge from the drive or insert a cartridge
into the drive
. If you want to remove a cartridge, wait until
the robot has placed it in the magazine before removing it. If
you want to add a cartridge, add it directly to the magazine.