Exabyte EZ17A, Инструкция по установке и эксплуатации, Страница: 12 / 168

xii Exabyte EZ17M and EZ17A
Operation
During normal autoloader operations, you do not need to
intervene in cartridge processing. However, you may need
to refer to these chapters for some occasional tasks.
§
Chapter 4 describes how to replace the magazine, how
to store cartridges, how to operate the autoloader in
Sequential mode, and how to view autoloader
information. It also describes how to perform hardware
exercises and how to reset the autoloader.
§
Chapter 5 describes how clean and reset the drive, and
how to display information about the drive. It also
provides information about how to monitor the drive
LEDs and how to manually eject a cartridge.
Troubleshooting and service
Refer to these chapters for troubleshooting and service:
§
Chapter 6 describes how to use the Console firmware to
perform a diagnostic listing, update the firmware, and
view the LCD password.
§
Chapter 7 describes basic troubleshooting
recommendations.
§
Chapter 8 describes basic maintenance and how to
return the autoloader for service, if necessary.
§
Appendix C lists the error codes displayed on the
autoloader’s LCD and provides information about
resolving various error conditions.