Exabyte EZ17A, Инструкция по установке и эксплуатации, Страница: 41 / 168

Hardware Installation
Installation and Operation 25
3. Plug the male end of the power cord into the power source.
Note: The autoloader has autoranging voltage selection, so
you do not need to change the voltage setting.
Pow ering on the autoloader
1. Power on the host computer system.
Note: If your host system requires that attached peripheral
devices be powered on before the host, power on the
autoloader before you power on the host.
2. Push the power switch on the back of the autoloader to the on
position (the
I is pressed).
3. Wait while the autoloader performs its power-on sequence.
During this time, the following activities occur:
§
The cooling fan begins to rotate.
§
The LCD illuminates and displays the initialization
sequence.
§
The drive and the autoloader perform their power-on
self-tests.
§
The LCD displays the Status screen.