ES 2050/51
Changing and indication of program values
6
Current Time.
Press the "Time" key indicated by the symbol
, to display the current time.
Should it be necessary to change the programmed value; the arrow key "
8
" may be used to move the
flashing cursor to the digit to be changed, and the Number key "#" to make the change.
Information DISPLAYS.
The "INFORMATION" key makes it possible to retrieve information, e.g. values from memory. Each time
the "INFORMATION" key indicated by the symbol
, is pressed a different piece of information is
displayed :-
Flush period.
The programmed volume between successive flush signals, the volume remaining to the next flush
signal and the duration of the flush signal are displayed.
Regeneration time .
The duration of a complete regeneration cycle and the possible additional time which could be
programmed in are displayed.
Regeneration restrictions.
NoReg 16:00-18:00
if the control has been set to prohibit regeneration between certain times (section 3
of the programming instructions), this part of the display shows the time between which regeneration is
prohibited. Otherwise the display will read : NoReg---.
Current Time
Mo 16:48
Flushing
500l 350l 20s
Regen.time [min]
Σ
125 rest 15
NoReg16:00-18:00
IntRg72 MinRg4