ES 2050/51
Changing and indication of program values
7
IntRg 72
if the control has been set to initiate regeneration after a programmed time interval (section 4 of
the programming instructions), this part of the display shows programmed time interval in hours.
Otherwise the display will read : IntRg -.
MinRg 4
if the control has been set to give a minimum period between successive regeneration’s
(section 5 of the programming instructions), this part of the display shows the programmed time interval
in hours.
Otherwise the display will read : MinRg -.
Additional program.
If the additional program has been selected (section 15 of the programming instructions), the selected
start time and the duration of the additional program are displayed, if "Step 0" is displayed the additional
routine will operate before regeneration can commence, similarly "Step: E" indicates that the additional
routine will continue beyond the end of the regeneration cycle. If the program is activated the display
shows how long it has left to run.
If no additional program in has been entered "No additional program" will appear in the display.
Unit capacity.
The calculated capacity between regeneration’s is displayed.
Treated water produced.
The total volume of water which has been treated by the plant.
Warning:
This counter can be reset to zero by a service engineer, consult service logs for details of
the value prior to reset.
Additional progr.
Step:2 26 Min.
Unit capacity
150 m3
Treated water
45367 m3