ES 2050/51
Setting and changing of initial values
33
Regeneration-additional
programme
AD = Additional program during regeneration
It is possible to use the additional programme before the start of the
actual regeneration, that means before the regeneration valve is initiated.
In this case program Start phase: 0
This function can also be used to flush out the stand by unit of a duplex
plant prior to
bringing it into
service.
The additional
program and a
regeneration
cycle can also begin
simultaneously. The additional program can either be shorter, the same or of even
longer duration than the regeneration program.
In this case program in the phase of regeneration which is to start
simultaneously with the start of the additional program.
The additional
program can
follow the
regeneration
cycle, so that,
for
example, chemical tanks may be refilled, if required.
In this case program Start phase: E
Step nr: 15.2
Start phase: 2
Example: additional programme before the actual regeneration
Example: additional programme starts with the second step of regeneration
Example: additional programme follows the regeneration cycle