
ES 2050/51
Changing and indication of program values
8
Inputs.
Indicates the current status of each input, the inputs are :-
WM = water meter RC = regeneration chemicals WA = wait RS = regeneration start
Inputs WM, WA, and RS are shown as active when the external contacts are closed, RC is active
when the external contact is open. Active states are indicated by "1" after the input reference,
inactive by "0".
Outputs.
Indicates the current status of each output, " l " below an output number indicates an active output," - "
an inactive one.
Service - Telephone number.
To change the telephone number.
Select the digit using the "
8
" key, the number can then be changed by using either the "
6
" or "
t
" key.
Maintenance.
If the automatic maintenance required warning is programmed the pre set maintenance interval is
displayed on left hand side of the second line and the quantity of treated water produced since the last
maintenance visit is displayed on the right hand side of the second line.
Software version
The software is regularly updated in the factory.
Modifications are made in order to adapt the product in accordance technological changes and
customer requests. The display indicates which version of the software is loaded.
Input
WM0 RC0 WA0 RS0
Out123456789AB
|----------
Service
0031 73 443755
Maintenance
500m3 20m3
Software-version
ES2050 9606-2.20