
ES 2050/51
Setting and changing of initial values
31
Regeneration
times
14. Regeneration times.
The duration of each stage of regeneration must be programmed.
The number of stages was selected in programming section 11. No
times need to be programmed for the "SERVICE" condition.
In this step the number and duration of the regeneration step must
be entered.
Any value between 1 and 255 minutes can be programmed in.
For example for a 3 step regeneration.
Backwash
Stage 1: 10 min.
Injection/slow rinse
Stage 2: 60 min.
Fast rinse
Stage 3: 15 min.
To adjust the step times, position the cursor to the step number
using the
“
8
” key, select the required step using the “#” key then
position to the figure to be changed using the
“
8
” key and alter the
value using the “#” key.
To adjust another step time, reposition the cursor and proceed as
above.
15.1
14.1
Regeneration
times
m
m
m
m
m
m
m
m
1
2
3
4
5
6
7
8
Step nr: 14.1
Time phase 1 10m