Profiles for PHOENIX MIG/MAG systems
Profiles for the Profibus DP module
60
Item No.: 099-008225-EWM01
Process data
Byte
no.
Bit no.
Function
Description
0 0 Error
Bit allocation:
0
1
General fault message from process
No error
Fault occurred and not rectified
0 1 User-defined
input
1
Signal status of the digital input
Logic:
0V signal on the input = signal low
24V on the input = signal high
0 2 Process
active
Bit allocation
0
1
Indicates the completion of the welding process
Process ended (after gas post-flows)
Process running
0
3
I > 0
Bit allocation:
0
1
Current-flows signal from process
No current flowing
Current flows, arc stationary
0 4 Collision
signal
Bit allocation:
0
1
Signals the triggering of the collision protection
Collision or transmitter not connected
No collision
0
5
Ready for welding
Bit allocation:
0
1
Ready signal from process
System not ready
System is ready
0 6 Main
current
signal
Bit allocation:
0
1
Displays the status of the program sequence
Process is outside the main current phase
Process running in the main program
0 7 Fusing
Bit allocation:
0
1
Wire fusion message from process
Wire is free
Wire is fused onto the workpiece
1
0-7
Error
Error number of an error which has occurred
2
0-7
Actual welding voltage value,
high byte
Current actual value for the welding voltage
Range: 0 to 0x7FFF
corresponds to 0.0V to 100.0V
3
0-7
Actual welding voltage value,
low byte
Current actual value for the welding voltage
4
0-7
Actual welding current value,
high byte
Current actual value for the welding current
Range: 0 to 0x7FFF
corresponds to 0A to 1000A
5
0-7
Actual welding current value,
low byte
Current actual value for the welding current
6
0-7
Actual wire feed speed value,
high byte
Current actual value for the wire feed speed
Range: 0 to 0x7FFF
corresponds to 0.0m/min to 40.0m/min
