Profiles for PHOENIX MIG/MAG systems
Profiles for the CANopen module
Item No.: 099-008225-EWM01
47
Tx-PDO 1
Cob ID = 180h + address
Byte
no.
Bit no.
Function
Description
0
0
I > 0
Bit allocation:
0
1
"Current flows" signal from process
No current flowing
Current flows, arc stationary
0 1 Reserved
0 2 Process
active
Bit allocation
0
1
Signals the completion of the welding process
Process ended (after gas post-flows)
Process running
0 3 Main
current
signal
Bit allocation:
0
1
Displays the status of the program sequence
Process is outside the main current phase
Process running in the main program
0 4 Collision
signal
Bit allocation:
0
1
Signals triggering of the collision protection
Collision or transmitter not connected
No collision
0
5
Ready for welding
Bit allocation:
0
1
Ready signal from process
System not ready
System is ready
0 6 Reserved
0 7 Reserved
1
0-7
Error
Error number of an error which has occurred
2 0-7
Not
used
3 0
1-7
Sticking
Bit allocation:
0
1
Not allocated
Wire sticking message from process
Wire is free
Wire sticks to the workpiece
4 0-7
Monitoring
*
Bit allocation:
0
1
2
3
4-7
Bit field for displaying alarm messages during
welding parameter monitoring
Status = 0, no alarm
Status = 1, alarm
Welding voltage
Welding current
Wire feed speed
WF motor current
Reserved
*
From software version 0.0.10.X, the signals are allocated here!
