EPRO NVR Series
69
Note:
Do not take out the USB storage device or turn off the power during system
upgrading. When the upgrade is done, the system will restart automatically.
Click
Default
to return to factory default value,
Save
to save the settings, or
Cancel
to cancel
and leave the page.
4.1.5.2 Events
You can configure the system event settings on this page.
Event Type:
Select an event type from the drop-down list.
Enable:
Check the box to enable the function.
Show Message:
Check the box to enable the function. When the selected events have been
triggered, an event message will be displayed on the live screen.
Send Email:
Check the box to enable the function. When the selected events have been
triggered, the NVR will send an email alert to the receiver. Note that for this function to
work, you have to set up the Email function in advance (refer to
4.1.1.3.2 Email
).
Alarm Out:
Check the box to enable the alarm output.
Latch Time:
Set up the time for buzzer to sound when an event is triggered.
Buzzer:
Set up the time for buzzer to sound when an event is triggered.
Click
Default
to return to factory default value,
Save
to save the settings, or
Cancel
to cancel
and leave the page.
