EPRO NVR Series
112
5.4.7.3 Event Settings
You can configure the system event settings on this page.
Event Type:
Select an event type from the drop-down list.
Enable:
Check the box to enable the function.
Buzzer:
Set up the time for buzzer to sound when an event is triggered.
Show Message:
Check the box to enable the function. When the selected events have been
triggered, an event message will be displayed on the live screen.
Send Email:
Check the box to enable the function. When the selected events have been
triggered, the NVR will send an email alert to the receiver. Note that for this function to
work, you have to set up the Email function in advance (refer to
4.1.1.3.2 Email
).
Alarm Out:
Check the box to enable the alarm output.
Latch Time:
Set up the time for buzzer to sound when an event is triggered.
Click
Save
to save the settings or
Refresh
to refresh the page.
