EPRO NVR Series
42
4.1.1.3.3 Email
You can configure the email settings for email alerts on this page.
Note:
The Email setup page can be used to set up for 1) Email alert function, or 2) Sending
alarm events to Genie XMS (refer to
Appendix C Enabling Alarm Events on Genie XMS)
. The
two functions cannot be enabled simultaneously. If you want to enable alarm events to
Genie XMS, and in the meantime, receive email alerts from NVR, you can enable the Email
alert function using Genie XMS.
Email:
Select
Enable
to enable the Email function.
Encryption:
Select
Enable
if you want to enable the Encryption function.
SMTP Port:
Assign the port number used by the SMTP server.
SMTP Server:
Assign the SMTP (Email) server’s name. Note that for more reliable email
service, use the server’s IP address.
User Name:
Input the user name of the sender.
Password:
Input the password of the sender.
Sender:
Input the Email address of the sender (the NVR).
Receiver1-3:
Input the Email address of the receiver. You can input 3 receiver email
addresses.
Interval:
Configure an interval to send Emails when events occur.
Test Email:
Click to test whether the Email function is working normally.
Click
Default
to return to factory default value,
Save
to save the settings, or
Cancel
to cancel
and leave the page.
