EverFocus EPRO NVR 16 Скачать руководство пользователя страница 76

Страница: 76 / 132

EPRO NVR Series

4.1.5

Advanced

You can configure the system maintenance and system event settings on this page.

4.1.5.1 Maintain

You can configure system maintenance on this page.

Default User:

Select a default user from the drop-down list.

Auto Reboot:

Select

Enable

to enable the Auto Root function. You can further set up the

reboot time below.

Reboot:

If Auto Reboot is selected on the above section, set up the reboot time here for the

system to regularly reboot at the setup time.

Update:

Click to upgrade the system firmware. Please restore the firmware file in a USB

storage device and insert the USB storage device to the system in advance. When this button
is clicked, an Update window appears. Select the firmware file and then click the

button.

Load Default:

Click to initialize the system to the factory default. Click the button and select

the desired items to be restored to factory default.

Load Settings:

Click to import the file of system parameters from a USB storage device.

Please restore the file in a USB storage device and insert the USB storage device to the
system in advance. Select a file and then click the

button.

Save Settings:

Click to export the file of system parameters to a USB storage device. Please

insert a USB storage device to the system in advance. Select a directory and then click the

button.

Содержание EPRO NVR 16





































































































































Результаты поиска

Содержание EPRO NVR 16

Отзывы:

EverFocus EPRO NVR 16, Руководство пользователя, Страница: 76 / 132

Результаты поиска

Содержание EPRO NVR 16

Отзывы: