EPRO NVR Series
44
4.1.1.3.5 DDNS
You can configure the DDNS setting on this page. DDNS (Dynamic Domain Name System) is a
service used to map a domain name to the dynamic IP address of a network device. You can
set up the DDNS service for remote access to the NVR.
DDNS assigns a domain name (URL) to the NVR, so that the user does not need to go
through the trouble of checking if the IP address assigned by DHCP Server has changed.
Once the IP is changed, the NVR will automatically update the information to the DDNS to
ensure it is always available for remote access.
Note that before enabling the following DDNS function, user should have applied for a host
name from the DDNS service provider’s website. We highly recommend that you use
xxxx.everfocusddns.com for the simplicity of setting up your NVR. Please refer to
EverFocus
DDNS
on the next page.
DDNS:
Select
Enable
from the DDNS drop-down list to enable DDNS function.
Server:
Select a DDNS service provider from the drop-down list.
Doman:
Input the domain name obtained from the DDNS service provider. Note that before
enabling the following DDNS function, user should have applied for a host name from the
DDS service provider’s website.
User:
Input the user name of the DDNS account.
Password:
Input the password of the DDNS account.
Test DDNS:
Click the button to test whether the DDNS function is working normally.
Click
Default
to return to factory default value,
Save
to save the settings, or
Cancel
to cancel
and leave the page.
