EPRO NVR Series
60
Parity:
This field is to select the parity level at which you will be connected.
Tour:
Select
Enable
to enable the tour function.
Address:
Input the ID address of the PTZ camera. Note this address should match the one set up
on the PTZ camera.
Copy:
You can apply the same configurations from one channel to the desired channels.
Select a channel from the
Copy
drop-down list first and then select a desired channel (or All)
from the
To
drop-down list, click the
Copy
button, the selected channel(s) will be applied
with the same configurations.
Click
Save
to save the settings, or
Cancel
to cancel and leave the page.
