EVJ 700
EVJ 700
EVJ 700
EVJ 700 ----
Application Manual:
144EVJ700E204
EVCO | 29.01.2021
| 16
Available menus
Available menus
Available menus
Available menus
The following menus are available on the configuration screen:
–
Configuration
–
Service
–
Language
–
Internal values
–
Restore parameters
Configuration
In this menu it is possible to set
the application to be managed using the controller through the dedicated parameter
“e1”.
Once the application has been selected, the relative default parameters will be automatically uploaded.
Service
Parameters can be displayed and changed in this menu.
The complete list of the parameters with their labels, descriptions and values can be found in the section “Table of
parameters. After entering the password, the complete list of parameters will appear on the screen.
The parameters to change can be selected by pressing the
function keys corresponding to the “UP” and “DOWN”
arrows and then the “SET” function key to confirm.
Language
The required language can be chosen in this menu:
–
Italian
–
English
–
French
–
German
–
Spanish
The language to set can be selected by pressing the
function keys corresponding to the “UP” and “DOWN” arrows
and then the “SET” function key to confirm.
Internal values
The status of the inputs and outputs available for the application in use can be viewed in this menu:
–
Probes
–
Digital inputs
Restore parameters
The parameter values can be restored in this menu, restoring the controller to the factory
settings.
