Evco EVJ 700, Руководство по применению

Страница: 12 / 52

EVJ 700
EVJ 700 EVJ 700
EVJ 700 ----
Application Manual:
144EVJ700E204 EVCO | 29.01.2021 | 12
Navigation Navigation Navigation Navigation
Introduction Introduction Introduction Introduction
The controllers in the EVJ 700 range have 6
capacitive keys and a push encoder (optional).
All the functions can be activated by both the keys
and the encoder.
Later sections in this manual will describe the
platform used for each of the 9 available
applications in detail,
while the normal navigation and configuration
procedures are illustrated below.
Keypad
Keypad Keypad
Keypad
The keypad has 6 capacitive keys; 2 have set functions (ON-
OFF and REFRESH), while 4 have functions which vary
according to the menu the user is in. Pressing a "function" key
enables the function indicated on the icon above the key.
ON-OFF
Pressing this key for 2 seconds
switches the controller on/off
REFRESH
At the end of the countdown, pressing this key
will refresh the time previously set on the
selected timer
FUNCTION
Depending on the application activated, the
four function keys are used to select:
–
type of cooking
–
temperature setpoint
–
heating power
–
cooking time
Once the function has been selected (e.g. the
timer), the relative icon goes from grey to white, as
does the value which is to be modified.
If a value needs to be changed from the
keypad, the function keys are momentarily
used as icons
“-”, “+”, “SET”.
Push encoder
Push encoder Push encoder
Push encoder
The functions can also be selected using the encoder by
simply pressing the push button. When the icons are
selected, they change colour
:
–
grey not selected
–
white selected and ready to be modified
The value of the selected function is changed by
turning the
encoder clockwise or anticlockwise.
Encoder purchasing codes
EVC99C00X0XXX03
Encoder push soft torque
EVC99C00X0XXX04 Encoder push heavy torque
PUSH
to choose the desired function
TURN
to change the chosen value