EVJ 700
EVJ 700
EVJ 700
EVJ 700 ----
Application Manual:
144EVJ700E204
EVCO | 29.01.2021
| 13
Changing values
Changing values
Changing values
Changing values
Values can be changed either by using the keypad or
the push encoder.
–
Keypad:
Select the desired function, the value will become
white. Press one of the function keys on the monitor
and the “-”, “+”, “SET” values will appear.
The value can be increased or decreased by pressing
the relative key and then confirmed with the “SET” key.
–
Push encoder:
Select the desired function by pressing the push
button on the encoder. The value will become white.
Turn the encoder to set the value and press the
push button once again to confirm.
If neither of these two procedures are carried out
within 5 seconds, the controller will automatically
save the displayed value.
The display will return to the ON screen:
Function
Select the
function
VALUE
change the value
using the “-”, “+”,
“SET” keys
Power failure
Power failure
Power failure
Power failure
In the event of a power failure during normal operation, the controller will start working again according to the
configuration of parameter “
A13
”.
Communication
Communication
Communication
Communication
The following products can be connected through the TTL port:
–
EVJKEY
(programming key)
–
EVIF22TSX
(TTL/RS-485 serial interface)
0
1
00:00
3
4
5
00:00
- +
