Instruction Manual MM850432 ed. 05
27
3.2 Display
The figure shows the features of a typical display. The display shown is in MEASURE and SOURCE mode.
The other parts of the display are as follows:
•
Status box
: show the operative mode symbols (see the table below).
•
Channel 1 box
: show the CH1 measured value, engineering unit and input mode.
•
Secondary value
: show the measure or source value (CH2, Pressure, etc), engineering unit and input or output mode.
Symbols
Description
Numeric Pad active
:
When this symbol appear on display, the instrument is waiting for a numeric input (e.g. in calculator mode)
Characters Pad active
:
When this symbol appear on display, the instrument is waiting for a string input
Battery level
:
This animated symbol will show the level of charge of the rechargeable batteries.
H
Data Hold:
This symbol appears on display when the measures are freezed by pressing the [
HOLD
] key.
Z
Zero function:
This symbol appears on display when the [
HOLD
] key is keep pressed for more than 2 seconds. It shows that the
relative measuring is active.
L
Data Logger
:
This symbol appears on display when data jogging is active.
