ETC transtechnik FDX2000, Руководство по эксплуатации

Страница: 6 / 42

However, as with all electrical equipment, you will need to observe a few simple rules:
•
Never switch on equipment that is obviously damaged. Send the equipment to an
authorized dealer or back to the factory for repairs.
•
If there is any reason to suspect a fault, unplug the equipment from the mains
supply immediately. Ensure that it cannot be started up again and send the
equipment to an authorized dealer or back to the factory for repairs.
•
Always unplug equipment from the power supply before opening it.
•
Components inside the equipment can be very hot if it has only just been switched
off.
Repairs should only ever to be made by an authorized dealer or by
transtechnik.
The FDX2000 robust, but...
FDX2000 has been designed to cope with the rigors of use on the road, so it will put up with a lot.
Nevertheless, you should still adhere to the following guidelines:
•
Only use your equipment for the purpose for which it is intended.
•
Ensure that the equipment is sufficiently well ventilated to allow excess heat to
escape.
•
Avoid extreme mechanical loads (for example, throwing).
•
Avoid direct contact with moisture.
– 2 – FDX2000 Vers. 4.0.0