ETC transtechnik FDX2000, Руководство по эксплуатации

Страница: 18 / 42

•
Use
[PAGE]
or the encoder to scroll to the
D05
Limit menu
D06, Switch point for dimmer of type
Nondim
For all dimmers that are entered as type
Nondim
you can set individual
upper and lower switching thresholds.
Value range:
---
(0%) through
100%
Factory setting:
10%
for both switch points
Switchpoints D06
1-96: 70% 85%
Activation threshold
Deactivation threshold
Open
•
Hit the
[ESC]
button until the main menu appears
•
Use
[PAGE]
or the encoder to scroll to the
M06
Dimmer menu
• [EDIT]
takes you to the most recently called
Dxx
dimmer menu
•
Use
[PAGE]
or the encoder to scroll to the
D06
Switch points menu
D07, Assign analog input
Signals from the analog input connector can be assigned individually to each dimmer. There are three
possible settings:
•
Analog input does not influence the control level. Analog input D07
1-96: ---
•
Any of the 12 analog channels controls a master which determines
the control level
Analog input D07
1-96: A 1 mastr
•
Any of the 12 analog channels control 1:1 the control level of the
dimmer (0–10 V is equal to 0–100%).
Analog input D07
1-96: A 1 merge
Open
•
Hit the
[ESC]
button until the main menu appears
•
Use
[PAGE]
or the encoder to scroll to the
M06
Dimmer
menu
•
[EDIT]
takes you to the most recently called
Dxx
dimmer
menu
•
Use
[PAGE]
or the encoder to scroll to the
D07
Analog input
menu
D08, Type of feedback
Feedback type can be set individually for each dimmer.
Feedback D08
1-96: Type I/V
I/V current and voltage monitoring
-/- no monitoring
I/- current monitoring
-/V voltage monitoring
Factory setting:
-/V
Calling
the menu
•
Hit the
[ESC]
button until the main menu appears
•
Use
[PAGE]
or the encoder to scroll to the
M06
Dimmer menu
• [EDIT]
takes you to the most recently called
Dxx
dimmer menu
•
Use
[PAGE]
or the encoder to scroll to the
D08

– 14 – FDX2000 Vers. 4.0.0